Lab 7: DLP

Deadline: Tuesday, July 23, 11:59:59 PM PT

Lab Slides

Setup

You must complete this lab on the hive machines (not your local machine). See Lab 0 if you need to set up the hive machines again.

In your labs directory on the hive machine, pull any changes you may have made in past labs:

git pull origin main

Still in your labs directory on the hive machine, pull the files for this lab with:

git pull starter main

If you run into any git errors, please check out the common errors page.

Overview

In this course, we cover three main types of parallelism:

  • Data level parallelism (SIMD)
  • Thread level parallelism (OpenMP)
  • Process level parallelism (Open MPI)

This lab will cover DLP and TLP. You will see the other forms of parallelism in the Homeworks and the Projects.

SIMD

Read over the Intel Intrinsics Guide to learn about the available SIMD instructions (an intrinsic function is a function whose implementation is handled by the compiler). The Intrinsics Naming and Usage documentation will be helpful in understanding the documentation.

The hive machines support SSE, SSE2, SSE3, SSSE3, SSE4.1, SSE4.2, AVX, and AVX2, so you can check those boxes in the filters list. Some of the other instruction sets are also supported, but we can ignore those for the purposes of this lab.

While there's no deliverable for this section, reading the documentation will be extremely useful for other exercises in this lab and for project 4.

Example: Loop Unrolling

The sum() function in ex1.c is an unoptimized implementation of a function that sums elements whose value is >= 128 of a large array (roughly 2^16 elements). We use an outer loop to repeat the sum OUTER_ITERATIONS (roughly 2^14) times so we can take more accurate runtime measurements for calculating speedup. This is so speedup improvements are more apparent; the outer loop should not be unrolled. We time the execution of the code by finding the difference between the start and end timestamps (using clock()). The file ex1_test.c contains a main function that runs the various sum functions and computes their speedup.

Let's look at sum_unrolled(). This function is the result of unrolling the sum function four times. The inner loop processes 4 elements per iteration, whereas the inner loop in sum() processes 1 element per iteration. Note the extra loop after the primary loop -- since the primary loop advances through the array in groups of 4 elements, we need a tail case loop to handle arrays with lengths that are not multiples of 4.

For this lab, we've provided Makefiles, so please use the provided make commands instead of gcc to compile your code. Try compiling and running the code:

make ex1
./ex1

The unrolled function should be slightly faster, although not by much.

Question: if loop unrolling helps, why don't we unroll everything?

  • The unrolled code is harder to read and write. Unless you plan to never look at the code again, code readability may outweigh the benefits of loop unrolling!
  • Sometimes, the compiler will automatically unroll your naive loops for you! Emphasis on sometimes -- it can be difficult to figure out what magic tricks a modern compiler performs (see Godbolt in the next paragraph). For demonstration purposes, we've disabled compiler optimizations in this lab.
  • Loop unrolling means more instructions, which means larger programs and potentially worse caching behavior!
  • Our simplified examples in ex1.c use a known array size. If you don't know the size of the array you're working on, your unrolled loop might not be a good fit for the array!

Optional: you can visualize how the vectors and the different functions work together by inputting your code into the code environment at this link!

Another interesting tool that might help you understand the behavior of SIMD instructions is the Godbolt Compiler Explorer project. It can also provide a lot of insights when you need to optimize any code in the future.

Exercise 1: Writing SIMD Code

The following code demonstrates how to add together a 8-element integer array using SIMD instructions. Our registers in this example are 128 bits and integers are 32 bits. This means that we can fit four integers into one register.

int arr[8] = {3, 1, 4, 1, 5, 9, 2, 6};
// Initialize sum vector to {0, 0, 0, 0}
__m128i sum_vec = _mm_setzero_si128();

// Load array elements 0-3 into a temporary vector register
__m128i tmp = _mm_loadu_si128((__m128i *) arr);
// Add to existing sum vector
sum_vec = _mm_add_epi32(sum_vec, tmp);
// sum_vec = {3, 1, 4, 1}

// Load array elements 4-7 into a temporary vector register
tmp = _mm_loadu_si128((__m128i *) (arr + 4));
// Add to existing sum vector
sum_vec = _mm_add_epi32(sum_vec, tmp);
// sum_vec = {3 + 5, 1 + 9, 4 + 2, 1 + 6}

// Create temporary array to hold values from sum_vec
// We must store the vector into an array in order to access the individual values (as seen below)
int tmp_arr[4];
_mm_storeu_si128((__m128i *) tmp_arr, sum_vec);
// Collect values from sum_vec in a single integer
int sum = tmp_arr[0] + tmp_arr[1] + tmp_arr[2] + tmp_arr[3];

This is a lot of work for adding together 8 elements. However, this process greatly improves the performance of summing together the elements of large arrays.

  1. Implement sum_simd(), a vectorized version of the naive sum() implementation.

  2. Copy your sum_simd() code into sum_simd_unrolled() and unroll it 4 times. Don't forget about your tail case!

Tips

  • You only need to vectorize the inner loop with SIMD. Implementation can be done with the following intrinsics:

    • __m128i _mm_setzero_si128() - returns a 128-bit zero vector
    • __m128i _mm_loadu_si128(__m128i *p) - returns 128-bit vector stored at pointer p
    • __m128i _mm_add_epi32(__m128i a, __m128i b) - returns vector (a_0 + b_0, a_1 + b_1, a_2 + b_2, a_3 + b_3)
    • void _mm_storeu_si128(__m128i *p, __m128i a) - stores 128-bit vector a into pointer p
    • __m128i _mm_cmpgt_epi32(__m128i a, __m128i b) - returns the vector (a_i > b_i ? 0xffffffff : 0x0 for i from 0 to 3). In other words, out[32*i : 32*(i+1)] is all 1's if a[32*i : 32*(i+1)] > b[32*i : 32*(i+1)], else it is all 0's.
    • __m128i _mm_and_si128(__m128i a, __m128i b) - returns vector (a_0 & b_0, a_1 & b_1, a_2 & b_2, a_3 & b_3), where & represents the bitwise and operator

  • Don't use the store function (_mm_storeu_si128) until after completing the inner loop! It turns out that storing is very costly and performing a store in every iteration will actually cause your code to slow down. However, if you wait until after the outer loop completes you may have overflow issues.

  • Read the function declarations in the above table carefully! You'll notice that the loadu and storeu take __m128i* type arguments. You can cast an int array to a __m128i pointer.

Testing

To compile and run your code, run the following commands (reminder: please use make, not gcc):

make ex1
./ex1

The naive version runs at about 7 seconds on the hive machines, and your SIMDized version should run in about 1-2 seconds. The unrolled SIMDized version is slightly faster than sum_simd, but most likely by just a few fractions of a second.

The autograder tests are similar to those in ex1_test.c, but with potentially different constants (NUM_ELEMS and OUTER_ITERATIONS) and reduced speedup requirements (to compensate for more variability in autograder resources).

Common Bugs

Below are common bugs that the staff have noticed in implementations for this exercise.

  • Forgetting the conditional in the tail case: what condition have we been checking before adding something to the sum?
  • Adding to an uninitialized array: if you add stuff to your result array without initializing it, you are adding stuff to garbage, which makes the array still garbage!
  • Re-initializing your sum vector: make sure you are not creating a new sum vector for every iteration of the inner loop!
  • Trying to store your sum vector into a long long int array: use an int array. The return value of this function is indeed a long long int, but that's because an int isn't big enough to hold the sum of all the values across all iterations of the outer loop. long long int and int have different bit widths, so storing an int array into a long long int will produce different numbers!

General SIMD Advice

Some general advice on working with SIMD instructions:

  • Be cautious of memory alignment. For example, _m256d _mm256_load_pd (double const * mem_addr) would not work with unaligned data -- you would need _m256d _mm256_loadu_pd. Meanwhile, if you have control over memory allocation, is almost always desireable to keep your data aligned (can be achieved using special memory allocation APIs). Aligned loads can be folded into other operations as a memory operand which reduces code size and throughput slightly. Modern CPUs have very good support for unaligned loads, but there's still a significant performance hit when a load crosses a cache-line boundary.
  • Recall various CPU pipeline hazards you have learned earlier this semester. Data hazards can drastically hurt performance. That being said, you may want to check data dependencies in adjacent SIMD operations if not getting the desired performance.

Exercise 2: Reflection and Feedback Form

We are working to improve the class every week - please fill out this survey to tell us about your experience in discussion and lab so far!

Submission

Save, commit, and push your work, then submit to the Lab 7 assignment on Gradescope.